rbuser
Comments
-
Thanks Jim...I'll check.
Eric
-
Thanks Jim.
No. They are all section reports. Not sure why getting the access violation.
It only happens if I don't print the first report. However, if I print the
first report at least once, and then try again to not print the … -
I assigned the event handler after the LoadFromDatabases command as follows:
Rinvoicing.OnPrintingComplete := RinvoicingPrintingComplete;
This did not seem to work. However, I assigned the AfterPrint event like
this… -
Hi,
Actually, we use the report builder BPLs in our deployment. And we have no
report builder installed previously.
Cheers,
Danny.
-
> Does ReportBuilder have or support the 2D Data Matrix Font on its
A 2D barcode is much more than just a font. 2D stands for 2 Dimensional
(like a grid format), while text is always 1 Dimensional (sequential
character forma… -
I would like to jump in here with a similiar question for the "2D barcodes"
topic. I would like to use a 2D Data Matrix Barcode Font (instead of a 3 of
9 Barcode Font) with my current end user bills RTM. This font will be
scanned by… -
Thanks for that!! Got it working.
-
Thank you for this reply.
However, I did try to follow the code that you suggested, but when dialog is
active there is nothing in combo - boxes. When clicked OK access violation
error message displays.
This is the cod… -
Thanks. I'll check that.
--
--------------------------------
Bruce Heller
Ligne Directe: 01.47.66.55.64
Fax: 01.47.66.55.54
Standard: 01.47.66.55.50
--------------------------------
TERRA VIRTUALOk it is looking better!!!!
One silly thing was that I did not close the pipeline before regerating the
report.
The behavior of the report came right after I discovered the
ppRepot.ResetFromPageNo procedure.
Thanks, but I have tried it. I do not think that the problem lies with the
JIT because the report a a whole acts strangely. For instance if I preview a
report and (Cashed and singel traversal) and forward to the last page and
then clo…Rick:
I store all mine in a DB (Paradox, in my case) table. Works real well.
Ed Dressel
Team DM
I'll second that motion!
I am under alot of pressure to move to .NET. I would very like to here form
Borland that they are working on a .NET solution.
Jamey...
Thanks Jim,
I see how to register my own label definitions now. You guys are smart...
Anyway, what about the strange behavior that was the first question of the
original post?.
On screen and in preview mo…Hi,
I solved that with a calc field concatenating the sort field, a
delimiting character, the the real field into a string, then stripping
the first part before printing the cell.in Request - cross tab sorting Comment by rbuser January 2002
Blame it on the driver :-)
I cranked the resolution up from 120x144 to 240x144 and that solved the
problem.
Cheers,
-Jorge
last
field
You'll need to change the source of the packages to point at rbRCL55.dcp
instead of rbRCL66 and then compile.
Tks, but I have a problem, for the installatios is asking for rbRCL66.dcp, but
I have rbRCL55. It's means that it work only with Delphi 6? if not how I can
get the rbRCL66?
Thanks again.
Alberto Hernandez
Alberto,
Go to the DM website (www.digital-metaphors.com) and find the "Friends|RCL"
section, there's a Rotated Text component there.
Robert Leahey
robert@leahey.com
I have the exactly described situation. In TppReport.BeforePrint event by
testing the size of the paper
I'm trying to stop the print process (tppReport.Reset, cancel=true,...
doesn't work,probably because
CancelDialog is a modal …I (may/probably ) have it down to a point where if the Master
Table points to my datamodule (dmf.working) as opposed
to pointing to the same table with a component on my
report form, I get the AV. Using the component on the
repor…"Jim Bennett \(Digital Metaphors\)"
"Bruce Roberts" wrote:
Didn't work on the HP DJ600C I have. I increased the right margin,
and narrowed the report. It still truncated the left edge.
Gene Weinbeck
gene@FundRaiserSoftware.com
Professional…
"Jim Bennett \(Digital Metaphors\)"
Hi Kieron...
Yupp
Just put each row of Memo Fields into a Region. Then make the second
Region shift relati…
Yeah, cheers Marco...I see you're right.
Here's the problem though...
My memo fields must all be set to Stretch. The second row of memo fields
need to shift downwards(as a whole) to avoid the first row overlapping. …Hi Kieron...
Though it seems it uses two font sizes, this is not really the case.
ReportBuilder occasionaly changes the size on-screen but will print it
correctly. Try it outin Stretch n' Stuff Comment by rbuser January 2002
The overlapping is no longer a problem.
I just want to stop the font decreasing in size when the memo field is
stretched. Can this be done? If not, why not? It just makes my report
look messy with two different sizes of…I had already read the TechTip and tried everything it said. I had been
putting off the update for a better time. No time like the present, it
worked, my report works just fine now. Thanks for the help.