rbuser

Comments

• Bernd, I have built a small app and reproduced your problem. If I am able to
  understand you correctly, you use a ppVariable at the footer to hold the min
  value. And you can see the lowest value in the footer but cannot mark it
  corr…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• I just reproduced this with one of the demo reports.
  
  1) Place a variable in the footer and calc it by
  ... if value < var then value:=var ...
  Gives you the minimum of the details
  2) Add a look ahead var, placed in the…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• Well, Sean, i am not asking the easy questions :-)
  
  this to
  
  I think, the timing is the problem. I get the MIN-Value correctly, but the
  comparison in the second pass copmpares to the wrong values.
  
  I?ll try to make…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• > Hi Sean,
  
  YW. Then you will need an oracle or a two pass report. Use OnStartFirstPass
  and OnEndFirstP…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• Hi Sean,
  
  thank you for assistance. The problem is, that the MIN-Value is available
  AFTER the report has finished. So when the value to be marked is printed,
  the MIN value is not known yet.
  
  And even with look ahead and…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• Well, I think the easiest way will be to use a string typed variable. Place
  it near your values and use OnCalc event;
  
  if = then
  ppVariable1.Value := '*'
  else
  ppVariable1.Value := '';
  
  Good luck,
  S…

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• Besides the fact, that 2 is the real minimum....
  
  Bernd
  
  What
  

  in Q: How to mark a minimum value as the min Comment by rbuser March 2004
• Never mind, it was my mistake
  
  --
  Guillermo Casta?o A.
  www.GrupoMillennium.com
  

  in ppParameter.pas Comment by rbuser March 2004
• On Fri, 26 Mar 2004 11:37:25 +0200, Pekka Henttonen
  

  in "Operation not applicable" while previewing the report Comment by rbuser March 2004
• Printout is chipped
  
  
  

  in Chipped characters Comment by rbuser March 2004
• Thanks Nard.
  
  I was not aware that there was a time limit on threads. My news
  reader highlights all threads with new unread posts. After a pause of
  how many days should I start a new thread?
  
  I didn't (mean to) assign…

  in Automatically pop up the Data Tab New Items Dialog Comment by rbuser April 2004
• Nard, I need to get this done today/tomorrow so any help would be
  appreciated.
  
  Cheers,
  
  

  in Automatically pop up the Data Tab New Items Dialog Comment by rbuser April 2004
• Thanks Nard, I started, had issues and am now back at it.
  
  I am using the report explorer and the OnLoadEnd event doesn't fire on
  a new template - but the OnNew does.
  
  However doing that gives me the following issues and que…

  in Automatically pop up the Data Tab New Items Dialog Comment by rbuser April 2004
• Also the drawcommandobject1 and drawcommandobject2 (from mey ppregion1
  and ppregion2) height's are both 60000 which is what they were original
  set to. It would appear, unless i'm incorrect, that after it stretchs
  the height value …

  in Region Next to a region Comment by rbuser March 2004
• Ok i figured out why it was blowing up and fixed that but it still seems
  to have no affect.
  
  i set the drawcommandobject1.height equal to the drawcommandobject2.height
  
  Is this correct? it appears to do nothing;
  
  

  in Region Next to a region Comment by rbuser March 2004
• Nard Moseley (Digital Metaphors) wrote:
  
  
  Do you have an example of this? I tried it and it would appear the
  drawcommand is destroyed by the time i try to reference it in the
  aftergenerate, unless i did it wrong.
  

  in Region Next to a region Comment by rbuser March 2004
• Nico,
  It worked perfectly (of course)... should have known there was an easy
  way!
  
  Jon
  
  

  in Disabling Explorer menu items at run-time Comment by rbuser March 2004
• Nico,
  I just missed the ItemOptions... Duh!
  Thanks for the reminder!
  
  Jon
  
  
  

  in Disabling Explorer menu items at run-time Comment by rbuser March 2004
• Hello Nico,
  
  I have send some more info to support.
  
  Eric
  
  

  in problem with shape and memo Comment by rbuser March 2004
• That is it!
  
  I just had to use the correct type of object to begin with.
  My standard toolbar was not showing, so I kept using DBCalc.
  
  I made the variable with this code:
  
  Value := (DBCalc9.Value/DBCalc4.Value)*100…

  in How do I make a DBCalc field to put code into? Comment by rbuser March 2004
• Hi Nico,
  
  What tab is tppvariable on: Data View, Calc or Design?
  
  I did try going to the Variables "aspect" of the Calc tab
  but I'm not sure how to make one.
  
  Thanks,
  Susan
  
  
  

  in How do I make a DBCalc field to put code into? Comment by rbuser March 2004
• For the benefit of someone else who may have the same problem, setting
  "CachePages=true" solved the problem.
  

  in SkipLabel Problem Comment by rbuser March 2004
• One other difference that I should have mentioned is that I am using a JIT
  Pipeline while the example uses a DB Pipeline.
  
  Tom
  

  in SkipLabel Problem Comment by rbuser March 2004
• well, how do I update the dataset then? I've already called
  
  TppReport(MYViewer.Report).reset;
  MyViewer.RegenerateReport;
  
  and it still not re-fetching the new data.
  
  thanks
  
  

  in How do I refresh the data on my preview form? Comment by rbuser March 2004
• > For future reference, please post RAP questions in the RAP newsgroup so we
  Ok, sorry.
  
  and
  
  
  The calculations basically are of the form: Value:=Function(X);
  
  I experienced that, when switching from and ba…

  in Problem with 2pass report Comment by rbuser March 2004
• It occurs when with TppImage.
  
  -Schalk
  
  
  

  in Range Checking error when printing images Comment by rbuser April 2004
• Where is the range check error occuring? Can you print to some printers and
  not others?
  
  Some 3rd party products (I dont' have a list but one for example is IB
  Express) does not expect range checking on.
  
  --
  Ed Dr…

  in Range Checking error when printing images Comment by rbuser March 2004
• Correction, that works fine on the viewer, but
  when it prints from the viewer, the total picks up
  at some place and gives bad totals.
  

  in where to do manual calculations Comment by rbuser March 2004
• Thank you very much Nico.
  
  That was the answer.
  
  Just about pulled my hair out on this( don't have much to pull).
  
  LOL
  
  THANKS AGIAN.
  

  in where to do manual calculations Comment by rbuser March 2004
• LSO TRIED ON CALC.
  
  THE REPORT ENGINE KEEPS TRAVERSING THRU THE RECORDS.
  
  I CAN GO BACK AND FORTH BETWEEN PAGE 1 AND 2 AND THE TOTALS
  
  KEEP GETTING BIGGER AND BIGGER AND BIGGER AND BIGGER.
  
  TIA.
  

  in where to do manual calculations Comment by rbuser March 2004
More Comments